[Materials data sheet]
Cevian V / ABS resin

Properties	Test method	test condition	Unit	General purpose					Easy flow		Heat resistant							Transparent			UV resistant	For Plating	For Extrusion	Chemical resistant	Sliding	GF-reinforced
																										GF10%	GF20%	GF30%
				300 300SF	320 320SF	500 500SF	510 510SF	520 520SF	660 660SF	680 680SF	400N 400NF	400T 400TF	466MD	464MD	462M	460M	450SF	T500 T500SF	T550 T550SF	T800 T800SF	650	MX5	720	860	910B	VGR10 VGR10F	VGR20 VGR20F	VGR30 VGR30F
Melt mass-flow rate	ISO 1133	220℃/10kg	g/10min	12	17	19	21	22	45	55	2	3.5	4	7	15	20	10	25	28	27	20	12	6	13	22	-	-	-
Mold shrinkage	ASTM D955		%	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.7	0.4-0.6	0.5-0.8	0.5-0.6	0.4-0.7	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.6	-	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.6	0.4-0.6	0.2-0.5	0.1-0.4	0.1-0.4
Tensile strength	ISO 527		MPa	37	43	48	51	55	47	42	50	42	43	43	43	43	51	42	48	41	48	49	41	46	46	80	90	100
Flexural strength	ISO178		MPa	60	70	75	80	95	75	70	72	66	69	69	67	67	80	63	74	55	75	67	60	68	68	110	130	150
Flexural modulus	ISO178		MPa	1900	2300	2500	2700	3000	2500	2300	2400	2300	2300	2300	2400	2400	2600	2000	2300	2000	2500	2300	2100	2500	2600	4800	6800	8800
Charpy notched impact strength	ISO 179/1eA	23℃ -30℃	kJ/m2	40 25	30 17	20 10	10 6	5 3	20 8	25 10	12 5	11 7	10 -	12 -	16 -	21 -	18 12	14 -	9 -	10 -	18 9	24 -	25 14	30 -	10 -	10 6	10 7	10 8
Izod notched Impact strength	ASTM D256	23℃/6.4mm -30℃/6.4mm	J/m	400 280	300 150	200 100	100 60	50 30	200 120	250 130	120 40	110 70	100 -	120 -	160 -	210 -	180 120	- -	- -	- -	200 90	- -	250 140	- -	100 -	120 40	110 40	100 40
Rockwell hardness	ISO 2039		-	R90	R110	R110	R110	R115	R110	R110	R102	R112	-	-	R110	R110	R115	-	-	-	R115	-	R110	-	-	R115	R115	R117
Deflection temperature under load	ISO 75 ASTM D648	1.80MPa 1.82MPa/12.7mm	℃	74 84	77 87	78 89	80 91	81 92	77 87	76 86	101 115	96 111	101 -	95 -	90 -	85 -	81 94	68 -	73 -	67 -	80 91	82 -	77 92	81 94	79 90	96 104	98 106	100 108
Vicat Softening Temperature	ISO 306/B50 ASTM D1525	50N,50℃/h 9.8N,50℃/h	℃	80 90	83 93	85 95	88 98	88 98	83 93	81 91	- -	106 116	- -	- -	- -		90 100	- -	- -	- -	- -	- -	86 96	- -	- -	99 108	103 112	104 113
Ball Pressure registration Temperature	-		℃	90	90	90	90	-	90	90	120	-	-	-	-	-	-	-	-	-	90	-	90	-	-	95	95	95
Coefficient of thermal expansion	ISO 11359	MD TD	×10-5/℃	9 -	8 -	8 -	8 -	8 -	8 -	8 -	6 -	8 -	8 -	8 -	8 -	8 -	8 -	- -	- -	- -	- -	- -	9 -	- -	8 -	5 8	4 8	3 8
Flamability *	UL94		-	HB 1.5-2.9mm	HB	HB	HB	HB	HB	HB	HB	HB 1.5-2.9mm	-	-	HB	-	HB	HB	HB	HB equivalent	-	HB equivalent	-	-	HB	HB	HB	HB
Dielectric strength	ASTM D149	1.5mm	MV/m	-	-	32	36	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	26	-	-	-
Arc resistance *	ASTM D495	3.0mm	sec (PLC)	-	-	102 (6)	91 (6)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	81 (6)	-	-	-
Light transmission	ASTM D1003		%	-	-	-	-	-	-	-	-	-	-	-	-	-	-	89	90	89	-	-	-	-	-	-	-	-
Water absorption	ISO 62		%	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	-	-	-	0.3	-	0.3	-	0.3	0.3	0.3	0.3
Density	ISO 1183		g/cm3	1.03	1.05	1.05	1.06	1.06	1.05	1.05	1.05	1.05	1.07	1.07	1.06	1.05	1.05	1.09	1.11	1.08	1.05	1.04	1.05	1.05	1.04	1.11	1.19	1.27

*"CELPURGE MA2" is recommendable for purging of Cevian.
For purging of filled grades or carbonized contamination, "CELPURGE AW2 / high cleaning type" or "CELPURGE AG4 / super cleaning type" is especially recommendable.