| Properties | Test method | Test condition | Unit | General purpose | GF-reinforced | Flame retardant |
CF-reinforced | |||||||||||
| Standard | Heat resistant | GF10% | GF20% | GF30% | V-0 Easy flow | V-0 Heat resistant | 5VAStandard | 5VA GF10% |
5VA GF20% |
5VA GF30% |
V-0 GF10% |
V-0 GF20% |
V-0 GF30% |
|||||
| S1100 | S1500 | S1210 | S1220 | S1230 | S3100 (Type Y) |
S3500 | S4100 (Type V) |
S4210 (Type V) |
S4220 (Type V) |
S4230 (Type V) |
S5210 | S5220 | S5230 | CBG318 | ||||
| Mold shrinkage | ASTM D955 | % | 0.4 - 0.6 | 0.4 - 0.6 | 0.2 - 0.5 | 0.1 - 0.4 | 0.1 - 0.3 | 0.4 - 0.6 | 0.4 - 0.6 | 0.4 - 0.6 | 0.2 - 0.5 | 0.2 - 0.5 | 0.1 - 0.4 | 0.2 - 0.5 | 0.1 - 0.4 | 0.1 - 0.3 | 0.1 - 0.4 | |
| Tensile strength | ISO 527 | MPa | 53 | 52 | 72 | 86 | 98 | 50 | 52 | 50 | 59 | 78 | 92 | 75 | 95 | 120 | 70 | |
| Flexural strength |
ISO178 |
MPa | 85 | 87 | 110 | 125 | 140 | 75 | 82 | 79 | 103 | 124 | 145 | 130 | 155 | 180 | 120 | |
| Flexural modulus | ISO178 | MPa | 2400 | 2300 | 4000 | 5600 | 7600 | 2300 | 2400 | 2200 | 4200 | 5700 | 7700 | 4500 | 6500 | 9000 | 14000 | |
| Charpy notched impact strength | ISO179/1eA | 23℃ -30℃ |
kJ/m2 | 60 28 |
60 44 |
11 - |
9 - |
8 |
35 |
50 20 |
14 - |
7 - |
7 - |
8 - |
7 5 |
7 - |
9 8 |
5 - |
| Izod notched Impact strength | ASTM D256 | 23℃ /6.4mm 23℃ /3.2mm |
J/m | 600 - |
600 - |
110 - |
80 - |
70 - |
140 - |
200 - |
140 - |
- 70 |
- 70 |
- 80 |
60 - |
60 - |
80 - |
50 - |
| Deflection temperature under load | ISO 75 ASTM D648 |
1.80MPa 1.82MPa/6.4mm |
℃ | 100 110 |
110 120 |
112 122 |
117 128 |
119 129 |
100 - |
106 115 |
99 103 |
106 116 |
112 121 |
116 123 |
118 131 |
124 134 |
130 137 |
115 125 |
| Ball pressure registration temperature | - | ℃ | 110 | 130 | - | - | - | 120 | 125 | 115 | - | - | - | - | - | - | - | |
| Coefficient of thermal expansion | ISO 11359 | MD TD |
×10-5/℃ | 8 - |
8 - |
6 8 |
4 8 |
3 7 |
8 - |
8 - |
8 - |
6 8 |
4 8 |
3 8 |
6 8 |
4 8 |
3 8 |
- |
| Flamability * | UL94 | - | HB | HB | HB | HB | HB | V-0/1.6mm | V-0/1.5mm | V-1/0.80mm V-0/1.0mm 5VA/2.0mm |
V-0/1.5mm 5VA/2.0mm |
V-0/1.5mm 5VA/2.0mm |
V-0/1.5mm 5VA/2.0mm |
V-0/1.6mm | V-0/1.6mm | V-0/1.6mm | - | |
| Dielectric strength | ASTM D149 | 1.5mm | MV/m | 36 | 37 | 36 | 35 | 35 | 35 | 28 | 28 | 26 | 26 | 26 | 27 | 27 | 29 | - |
| Arc resistance * | ASTM D495 | 3.0mm | sec (PLC) |
108 (6) |
121 (6) |
106 (6) |
106 (6) |
117 (6) |
85 (6) |
94 (6) |
101 (6) |
70 (6) |
69 (6) |
69 (6) |
69 (6) |
69 (6) |
72 (6) |
- |
| Hot wire ignition * | UL746A | 1.5mm | sec (PLC) |
16 (3) |
12 (4) |
54 (2) |
54 (2) |
98 (1) |
45 (2) |
19 (3) |
26 (3) |
150 (0) |
150 (0) |
150 (0) |
42 (2) |
42 (2) |
150 (0) |
- |
| High ampere arc ignition * | UL746A | 1.5mm | (PLC) |
200 (0) |
200 (0) |
29 (3) |
15 (3) |
15 (3) |
150 (0) |
73 (1) |
36 (2) |
150 (0) |
149 (0) |
149 (0) |
150 (0) |
150 (0) |
150 (0) |
- |
| High voltage tracking rate * | UL746A | 3.0mm | mm/min (PLC) |
35 (2) |
56 (2) |
94 (3) |
94 (3) |
64 (2) |
127 (3) |
220 (4) |
230 (4) |
267 (4) |
300 (4) |
300 (4) |
281 (4) |
281 (4) |
141 (3) |
- |
| Comparative tracking Index * | IEC 112 | 3.0mm | V (PLC) |
275 (2) |
275 (2) |
175 (3) |
175 (3) |
175 (3) |
400 (1) |
250 (2) |
600 (0) |
100 (4) |
100 (4) |
100 (4) |
190 (3) |
190 (3) |
190 (3) |
- |
| Water absorption | ISO 62 | % | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | - | |
| Density | ISO 1183 | g/cm3 | 1.12 | 1.14 | 1.20 | 1.27 | 1.36 | 1.23 | 1.25 | 1.23 | 1.27 | 1.33 | 1.43 | 1.28 | 1.35 | 1.43 | 1.26 | |
| Surface Resistivity | ASTM D257 | Ω | 102-104 | |||||||||||||||
NOTES
1. UL recognition File No. of Daicel Polymer is E47773.
2. Values with asterisk (*) are UL-recognized values.
3. CF-reinforced grades come under Item 5 (18) of Annex 1 of the Export Trade Control Order on the basis of the Foreign Exchange and Foreign Trade Law of Japan.